Drawer Type Demister Is Easy to Clean, Repair & Replace

Drawer type demister is mainly formed by several rectangular mesh blocks, spacer bars and grids, which are put into a simple object composed by guide rails and seal plates. The mesh blocks are made of many layers of wave-type wire mesh which are flat placed. Having a detachable structure, it can be cleaned repaired and replaced easily, which can provide security for workers. At the same time, being able to partial replacement, drawer type demister has low maintenance.

This is a drawer type demister being put in use.

DTD-01: Drawer type demister has a detachable structure and is easy to clean, repair and replace.

There is a structure diagram of drawer type demister.

DTD-02: Drawer type demister is composed by several rectangular wire mesh blocks, spacer bars and grids.

Structure diagrams of drawer type demister whose nominal diameter is 300 to 800 mm, are from front view and top view.

DTD-03: Drawer type demister (DN 300 - 800)

Specification - drawer type demister (DN 300 - 800)
Model	Nominal diameter (mm)	Size (mm)				Defoaming area (m²)	The number of block
Model	Nominal diameter (mm)	H	H₁	A	δ	Defoaming area (m²)	The number of block
DTDS-01	300	100	160	200	6	0.04	1
DTDS-02	300	150	210	200	6	0.04	1
DTDS-03	400	100	160	300	6	0.09	1
DTDS-04	400	150	210	300	6	0.09	1
DTDS-05	500	100	160	400	6	0.15	1
DTDS-06	500	150	210	400	6	0.15	1
DTDS-07	600	100	160	450	6	0.21	1
DTDS-08	600	150	210	450	6	0.21	1
DTDS-09	700	100	160	500	6	0.27	1
DTDS-10	700	150	210	500	6	0.27	1
DTDS-11	800	100	160	600	6	0.38	1
DTDS-12	800	150	210	600	6	0.38	1

Structure diagrams of drawer type demister whose nominal diameter is 900 to 1400 mm, are from front view and top view.

DTD-04: Drawer type demister (DN 900 - 1400)

Specification - drawer type demister (DN 900 - 1400)
Model	Nominal diameter (mm)	Size (mm)				Defoaming area (m²)	The number of block
Model	Nominal diameter (mm)	H	H₁	A	δ	Defoaming area (m²)	The number of block
DTDS-13	900	100	160	380	8	0.47	2
DTDS-14	900	150	210	380	8	0.47	2
DTDS-15	1000	100	160	400	8	0.57	2
DTDS-16	1000	150	210	400	8	0.57	2
DTDS-17	1200	100	160	470	8	0.83	2
DTDS-18	1200	150	210	470	8	0.83	2
DTDS-19	1400	100	160	550	8	1.17	2
DTDS-20	1400	150	210	550	8	1.17	2

Structure diagrams of drawer type demister whose nominal diameter is 1600 to 2000 mm, are from front view and top view.

DTD-05: Drawer type demister (DN 1600 - 2000)

Specification - drawer type demister (DN 1600 - 2000)
Model	Nominal diameter (mm)	Size (mm)				Defoaming area (m²)	The number of block
Model	Nominal diameter (mm)	H	H₁	A	δ	Defoaming area (m²)	The number of block
DTDS-21	1600	100	160	450	8	1.56	3
DTDS-22	1600	150	210	450	8	1.56	3
DTDS-23	1800	100	160	490	8	1.98	3
DTDS-24	1800	150	210	490	8	1.98	3
DTDS-25	2000	100	160	560	8	2.54	3
DTDS-26	2000	150	210	560	8	2.54	3

Structure diagrams of drawer type demister whose nominal diameter is 2200 to 2600 mm, are from front view and top view.

DTD-06: Drawer type demister (DN 2200 - 2600)

Specification - drawer type demister (DN 2200 - 2600)
Model	Nominal diameter (mm)	Size (mm)				Defoaming area (m²)	The number of block
Model	Nominal diameter (mm)	H	H₁	A	δ	Defoaming area (m²)	The number of block
DTDS-27	2200	100	160	470	10	2.94	4
DTDS-28	2200	150	210	470	10	2.94	4
DTDS-29	2400	100	160	510	10	3.57	4
DTDS-30	2400	150	210	510	10	3.57	4
DTDS-31	2600	100	160	550	10	4.21	4
DTDS-32	2600	150	210	550	10	4.21	4

Structure diagrams of drawer type demister whose nominal diameter is 2800 to 3600 mm, are from front view and top view.

DTD-07: Drawer type demister (DN 2800 - 3600)

Specification - drawer type demister (DN 2800 - 3600)
Model	Nominal diameter (mm)	Size (mm)				Defoaming area (m²)	The number of block
Model	Nominal diameter (mm)	H	H₁	A	δ	Defoaming area (m²)	The number of block
DTDS-33	2800	100	160	400	12	4.60	6
DTDS-34	2800	150	210	400	12	4.60	6
DTDS-35	3000	100	160	430	12	5.38	6
DTDS-36	3000	150	210	430	12	5.38	6
DTDS-37	3200	100	160	470	12	6.33	6
DTDS-38	3200	150	210	470	12	6.33	6
DTDS-39	3400	100	160	500	12	7.24	6
DTDS-40	3400	150	210	500	12	7.24	6
DTDS-41	3600	100	160	530	12	8.23	6
DTDS-42	3600	150	210	530	12	8.23	6

Structure diagrams of drawer type demister whose nominal diameter is 3800 to 4200 mm, are from front view and top view.

DTD-08: Drawer type demister (DN 3800 - 4200)

Specification - drawer type demister (DN 3800 - 4200)
Model	Nominal diameter (mm)	Size (mm)				Defoaming area (m²)	The number of block
Model	Nominal diameter (mm)	H	H₁	A	δ	Defoaming area (m²)	The number of block
DTDS-43	3800	100	160	420	12	8.74	8
DTDS-44	3800	150	210	420	12	8.74	8
DTDS-45	4000	100	160	450	12	9.96	8
DTDS-46	4000	150	210	450	12	9.96	8
DTDS-47	4200	100	160	470	12	11.00	8
DTDS-48	4200	150	210	470	12	11.00	8

Structure diagrams of drawer type demister whose nominal diameter is 4400 to 5000 mm, are from front view and top view.

DTD-09: Drawer type demister (DN 4400 - 5000)

Specification - drawer type demister (DN 4400 - 5000)
Model	Nominal diameter (mm)	Size (mm)				Defoaming area (m²)	The number of block
Model	Nominal diameter (mm)	H	H₁	A	δ	Defoaming area (m²)	The number of block
DTDS-49	4400	100	160	500	12	12.29	8
DTDS-50	4400	150	210	500	12	12.29	8
DTDS-51	4600	100	160	520	12	13.50	8
DTDS-52	4600	150	210	520	12	13.50	8
DTDS-53	4800	100	160	550	12	14.94	8
DTDS-54	4800	150	210	550	12	14.94	8
DTDS-55	5000	100	160	570	12	16.27	8
DTDS-56	5000	150	210	570	12	16.27	8

Features

Simple & compact structure.
Easy to be clean, repair or replace.
Long service life.
Low cost.

Application

Being a superior gas-liquid separation unit, drawer type demister is generally used in chemical, petrochemical, metallurgical, light industries and many other fields to remove the entrainment carried by gas.

Package

Inner packing: clean plastic bags.
Outer packing: wooden boxes.